---
title: "How do I package an Etransmit in CAD applications"
slug: "how-do-i-package-an-etransmit-in-cad-applications"
updated: 2026-11-06T00:41:19Z
published: 2026-11-06T00:41:19Z
canonical: "help.12dsynergy.com/how-do-i-package-an-etransmit-in-cad-applications"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://help.12dsynergy.com/llms.txt
> Use this file to discover all available pages before exploring further.

# How do I package an Etransmit in CAD applications

1. Open the required drawing in your CAD application (AutoCAD or BricsCAD).
2. In the command line, run the command **ETRANSMIT**.
3. Adjust the **Etransmit** settings.
4. Do one of the following:
  - If you are using AutoCAD, modify the Transmittal Setup in the **Modify Transmittal Setup** prompt and ensure the settings shown in the image below are selected, at a minimum. ![](https://cdn.document360.io/36833d89-59e3-46a5-b491-e9aa1b524a85/Images/Documentation/image (48).jpg)
  - If you are using BricsCAD, select **Edit** from the top menu bar to edit the **Etransmit**. In the **eTransmit** prompt, select the **Select/deselect all font files** and **select/deselect all the unloaded xrefs** (if applicable) checkboxes as shown in the image below. ![](https://cdn.document360.io/36833d89-59e3-46a5-b491-e9aa1b524a85/Images/Documentation/bricsCAD.jpg)
5. Generate the **Etransmit** .zip file and save it on your local machine.
6. Upload the **Etransmit** output .zip file to the 12d Synergy Support ticket, as requested.